Wikiversity

Dominant group/Materials science

< Dominant group

"Materials science is studying the substances and their properties that make them useful in structures, machines, tools, devices, or products.

Here in this specimen of Tilly material clinochlore is definitely the dominant species with this freestanding crystal. Credit: Rob Lavinsky, iRocks.com.

Dominant group

edit
Main resource: Dominant group
  1. Accident hypothesis: dominant group is an accident of whatever processes are operating.
  2. Artifact hypothesis: dominant group may be an artifact of human endeavor or may have preceded humanity.
  3. Association hypothesis: dominant group is associated in some way with the original research.
  4. Bad group hypothesis: dominant group is the group that engages in discrimination, abuse, punishment, and additional criminal activity against other groups. It often has an unfair advantage and uses it to express monopolistic practices.
  5. Control group hypothesis: there is a control group that can be used to study dominant group.
  6. Entity hypothesis: dominant group is an entity within each field where a primary author of original research uses the term.
  7. Evolution hypothesis: dominant group is a product of evolutionary processes, such groups are the evolutionary process, produce evolutionary processes, or are independent of evolutionary processes.
  8. Identifier hypothesis: dominant group is an identifier used by primary source authors of original research to identify an observation in the process of analysis.
  9. Importance hypothesis: dominant group signifies original research results that usually need to be explained by theory and interpretation of experiments.
  10. Indicator hypothesis: dominant group may be an indicator of something as yet not understood by the primary author of original research.
  11. Influence hypothesis: dominant group is included in a primary source article containing original research to indicate influence or an influential phenomenon.
  12. Interest hypothesis: dominant group is a theoretical entity used by scholarly authors of primary sources for phenomena of interest.
  13. Metadefinition hypothesis: all uses of dominant group by all primary source authors of original research are included in the metadefinition for dominant group.
  14. Null hypothesis: there is no significant or special meaning of dominant group in any sentence or figure caption in any refereed journal article.
  15. Object hypothesis: dominant group is an object within each field where a primary author of original research uses the term.
  16. Obvious hypothesis: the only meaning of dominant group is the one found in Mosby's Medical Dictionary.
  17. Original research hypothesis: dominant group is included in a primary source article by the author to indicate that the article contains original research.
  18. Primordial hypothesis: dominant group is a primordial concept inherent to humans such that every language or other form of communication no matter how old or whether extinct, on the verge of extinction, or not, has at least a synonym for dominant group.
  19. Purpose hypothesis: dominant group is written into articles by authors for a purpose.
  20. Regional hypothesis: dominant group, when it occurs, is only a manifestation of the limitations within a region. Variation of those limitations may result in the loss of a dominant group with the eventual appearance of a new one or none at all.
  21. Source hypothesis: dominant group is a source within each field where a primary author of original research uses the term.
  22. Term hypothesis: dominant group is a significant term that may require a 'rigorous definition' or application and verification of an empirical definition.

Examples from primary sources are to be used to prove or disprove each hypothesis. These can be collected per subject or in general.

Chemicals

edit
Main resource: Chemicals
File:ReedmergneriteFD454b.jpg
This piece of reedmergnerite is from Darai-Pioz Glacier, Alayskiy Range, Tien Shan Mts, Tajikistan. Credit: Dakota Matrix.

On the right is an image of a specimen of the tektosilicate reedmergnerite from Darai-Pioz Glacier, Alayskiy Range, Tien Shan Mountains, Tajikistan. Its formula is NaBSi3O8. It has an albite structural type of a plagioclase feldspar with boron replacing aluminum.

For the "reedmergnerite unit, BSi4O10 ... The spectra showed small amounts of it, and we saw no evidence of fragmentation (i.e., no corresponding smaller fragments that would appear to be constituents). Thus, it does not appear to be the dominant group in the glass network. ... The borate association remains dominant, however, even as we increase the soda content."[1]

Alloys

edit
Main resources: Chemicals/Alloys and Alloys
 
This is a close-up of a sphere of titanium-zirconium-nickel alloy melted by laser inside the Electrostatic Levitator (ESL) vacuum chamber. Credit: NASA's Marshall Space Flight Center (MSFC).

"The dominant group of Al–Si foundry alloys contain between 5 and 25 wt.% Si, with Mg, Ni and Cu additions."[2]

"There is in reality a distribution of magnetic cluster sizes although the smallest magnetic clusters will constitute the dominant group."[3]

"From the above results we can see that the industry group metal alloys (33) is the dominant group in terms of number of employees, fixed capital and value added."[4]

"The dominant group is (SiGe)SiH, at T, = 190 "C and is replaced by (Ge,)SiH, at T, = 250 "C."[5]

Materials

edit
Main resources: Chemicals/Materials and Materials

Notation: let PE stand for polyethylene plastics.

There "is a dominant group (PE) that is still growing on the market. ... Pilot-scale composting tests are also suitable instruments for investigating any negative effects of the test materials on the composting process if sufficient test material is introduced."[6]

Materials sciences

edit
Main resources: Chemicals/Materials/Sciences and Materials sciences

In materials science, the cultural or technical term dominant group may be an artifact, an evolutionary process, or only an entity.

Def. "[m]atter which may be shaped or manipulated"[7] is called a material.

Def. "[a] region within a material having a single crystal structure or direction"[8] is called a grain.

Def. the "study of materials; their internal structures, properties and modes of failure"[9] is called materials science.

Def. an understanding of the nature of substances whose properties make them useful in structures, machines, devices, or products, leading to theories or descriptions that explain how structure relates to composition, properties, and behavior is called materials science.

Ceramics

edit
Main resources: Chemicals/Materials/Ceramics and Ceramics
 
The photograph shows a Chinese sancai sherd from the 9th to 10th century found in Samarra. Credit: PHGCOM.

Def. any nonmetallic solid that remains hard when heated is called a ceramic.

"The typology of the lustre ceramics shows that there is a small group (G1 = MZ2 + MZ6 + MZ12) with red lustre decoration on the interior and green-yellow lustre decoration on the exterior and a dominant group (G2) with yellowish lustre on both sides (Table 1)."[10]

"The different settlement ceramic assemblages present dominant technical sub-groups, which are different in aspect from one site to another (tab. 3). ... The ceramic entity A is characterised, from a technical and techno-petrographic point of view, by a discontinuity between one or two dominant sub-groups (quantitatively major) and a few satellite sub-groups (quantitatively minor). Ceramic entity B, on the contrary, shows a petrographic continuity with the dominant sub-groups A."[11]

Composites

edit
Main resources: Chemicals/Materials/Composites and Composites
 
The image shows a wood-plastic composite, a type of engineered wood. Credit: VarunRajendran.

"Both of the emission spectra present the characteristic emission bands originating from the transition 5 D 4 → 7 F J (J = 6,5,4,3), with the transition 5 D 4 → 7 F 5 green emission as the dominant group."[12]

"Both of the emission spectra present the characteristic emission bands originating from the transition 5 D 4 → 7 F J (J=6,5,4,3), with the transition 5 D 4 → 7 F 5 green emission as the dominant group."[13]

"Both of the emission spectra exhibit the characteristic emission of Tb3+ arising from the transition 5 D 4 → 7 F J (J = 6, 5, 4, 3), with the transition 5 D 4 → 7 F 5 green emission as the dominant group."[14]

"Also, the characteristic emission bands originating from the transition 5 D 4 → 7 F J (J = 6, 5, 4, 3), with the transition 5 D 4 → 7 F 5 green emission as the dominant group are observed in the emission spectra of the pure Tb(III) complex (Tb-L) and the hybrid materials as shown".[15]

"The ω-hydroxymonocarboxylates represented the dominant group with a contribution higher than one quarter of the total."[16]

Crystals

edit
Main resources: Chemicals/Materials/Crystals and Crystals

Def. "[a] solid composed of an array of atoms or molecules possessing long-range order and arranged in a pattern which is periodic in three dimensions", from Wiktionary crystal, is called a crystal.

“The dominant group V source is arsenic, although antimony and phosphorous sources are not atypical.”[17]

“We may assume, however, as has been suggested by Dunning (see the discussion in ref. 32) that these macrospirals are the result of a periodic perturbation due to an interaction of the spirals forming the dominant group of cooperating spirals.”[18]

Diamonds

edit
Main resources: Chemicals/Materials/Diamonds and Diamonds

"For as-deposited diamond, C---H is the dominant group on the hydrogen-terminated surfaces, and it has been found that ---OH [23] and C=O groups [24] are in fact generated on oxidized diamond surfaces."[19]

Dielectrics

edit
Main resources: Chemicals/Materials/Dielectrics and Dielectrics

"Our theory applies to parameters (to be identified below) for which the second group is dominant, allowing for the third group, labeled ψrem (mnemonic remainder) to be neglected in the calculation of the saddle-points."[20] "The dominance requirement constrains the remaining (first and third) terms of ψrem to be significantly smaller than the terms of the second group along the contour of integration. Since the two terms of the dominant group have comparable magnitudes, it suffices to make the comparison with only the second term in the dominant group."[20]

"Such work indicated that group III interdiffusion in InGaAs/InP is associated with a redshift, while a blueshift is associated with a dominant group V interdiffusion."[21]

"Hence we refer to this dominantly amplified magnon group as the dominant group."[22]

Fibers

edit
Main resources: Chemicals/Materials/Fibers and Fibers

"For example, As2 and P2 can sometimes be the dominant group V species in contrast to the equilibrium calculation, and, in addition, several kinds of internal compound between As and P are found."[23]

"Nearly 90% of L, in the "as-grown" ribbons belongs to class B and class C, with class B being the predominant group (Fig. 3a)."[24]

"Free fatty acids were the most dominant group of lipids in rice straw extract and the second most abundant class of lipophilic substances in rye straw extractives."[25]

Glasses

edit
Main resources: Chemicals/Materials/Glasses and Glasses

Notation: let the symbol KREEP be an acronym for potassium (the chemical symbol is K), rare earth element (REE), and phosphorus (chemical symbol is P).

"Because KREEP glasses are the dominant group at the Fra Mauro sampling site and because the Fra Mauro formation is considered part of the Imbrian ejecta blanket, KREEP basalts appear to have been part of the lunar crust prior to formation of the Imbrium Basin."[26] Bold added.

"This likely is the result of the fact that the six-membered ring group becomes the dominant structural group in the vicinity of x = 0.5, whereas the tetrahedral boron group is becoming the least prominent structural group in the glass."[27]

"In the other series of glasses, Li, Na, and K, in particular, that can be formed out to x = 0.75, the IR spectra clearly show that this structural group becomes the dominant group in the glass at this composition [4,5,43]."[27]

"Thus, it does not appear to be the dominant group in the glass network."[1]

Martensites

edit
Main resources: Chemicals/Materials/Martensites and Martensites

“In Section 3, we use group theory to present the system description of the microstructure of 2H martensite, including the correspondence variant dominant group.”[28]

“The dominant group always consisted of four habit-plane variants grouped round a particular {llO} pole of the austenite, except in the case of the crystal with compression axis close to [001] which developed only two habit planes.”[29]

Metals

edit
Main resources: Chemicals/Materials/Metals and Metals

Regarding the straggling of alpha particles in metal foils, "the Bi'" and Am'" sources each have two closely spaced alpha-particle groups and the Pu'" source has three such groups, it was found that the resolution obtained with the apparatus enabled one to obtain the location of the dominant group in each source with great accuracy."[30]

Metallurgy

edit
Main resources: Chemicals/Materials/Metallurgy and Metallurgy

"Then, metallurgical reactions occur between the fuel slug and the cladding. ... Lanthanide elements, a dominant group of fission products, will be less significant because the solubility of lanthanide elements in the U—Pu—Zr alloys is limited (~O.6 wt% or less)(9) and the eutectic point in the binary system of any lanthanide element and Fe is higher than that in the Pu—Fe system"[31].

Nanomaterials

edit
Main resources: Chemicals/Materials/Nanomaterials and Nanomaterials

“Mesopores were still the dominant group of pores for all derivatives, as confirmed by the good agreement between the values of V tot and V mp D.”[32]

Piezoelectrics

edit
Main resources: Chemicals/Materials/Piezoelectrics and Piezoelectrics

Notation: let the symbol PZT stand for lead zirconate titanate (Pb[ZrxTi1-x]O3, 0 ≤ x ≤ 1).

“Among [the] variety of piezoelectric materials, PZTs have been the dominant group for more than 40 years for their excellent properties.”[33]

Plastics

edit
Main resources: Chemicals/Materials/Plastics and Plastics

Plastics also refers to polymers.

Notation: let the symbol PE stand for polyethylene.

"Finally, there is a dominant group (PE) that is still growing on the market."[6]

"The first class consists of polymers such as cellulose (cotton, wood, etc.) and protein (gelatine, wool, etc.), while the dominant group in the second class is rubber, both synthetic and natural."[34]

Precious metals

edit
Main resources: Chemicals/Materials/Precious metals and Precious metals

"The alluvial sample shows multiple populations that reflect all the samples collected at the mine, a dominant group which corresponds to the mine shaking table gold, and a minor population with higher silver which is similar to that shown by the soil sample."[35]

Sands

edit
Main resources: Chemicals/Materials/Sands and Sands

"The behavior of some sandy soils is conditioned by a dominant group of pores larger than 1.5 µ."[36]

"The dominant group in which the median grain-size falls is indicated (M: mud; FS: fine sand; MS: medium sand) as well as the number of observations in that group (based on sedisurf@database, Gent University, Renard Centre of Marine Geology)."[37]

"In the hypersthene dominant group the hornblende content does not exceed 20 vol.%."[38]

Semiconductors

edit
Main resources: Chemicals/Materials/Semiconductors and Semiconductors

Notation: let the symbol CP indicate band structure critical points.

"The dominant group speed of a carrier can be estimated to occur at the energy, above or below the CP where is the reduced effective mass and is Planck's constant."[39] "The largest of the resulting fragments from the break-up of the prior dominant group is a cluster of eight papers dealing almost exclusively with n-type semiconductors, with papers originating primarily from two research labs."[40]

Degradation of "Id-Vd characteristics before and after stressing for (a) the charge-trapping-dominant (group Í) and (b) the interface-trap- generation dominant (group 2) devices. Note the similar degradation characteristics for electron and hoie trappings."[41]

Stones

edit
Main resources: Chemicals/Materials/Stones and Stones

"Although calcitic marbles represent the dominant group in the studied rocks, dolomitic marbles are also present (Raspenava marble, Strážné marble, Bílá Voda marble, Bohdaneč marble, Český Šternberk marble)."[42]

Superconductors

edit
Main resources: Chemicals/Materials/Superconductors and Superconductors

Notation: let the symbol dmit indicate the 2-thioxo-1,3-dithiole-4,5-dithiolate dianion, C3S52-.

"Various crystals, and consequently various conductivities, can be obtained by using different monocations in the 1:2 salts of Z[Ni(dmit)2]2, which form the most dominant group in the Z[M(dmit)2]n family."[43] Bold added.

Notation: let the symbol ERDA stand for elastic recoil detection analysis.

"The dominant group in the lower half results from the first oxygen-bearing layer in the Si02(0.5 pm)/Al(0.5 pm)/Si02(0.5 pm)/Al(2.0 pm) target stack."[44]

Notation: let the symbol TN (or TN) stand for the Néel transition temperature.

"Below TN, the description of the experimental data requires at least a twoband picture with a dominant group of electrons showing standard BCS-Eliashberg-type behavior with a clear single gap whereas a second group of electrons dominates κ(T,H)."[45] Bold added.

Woods

edit
Main resources: Chemicals/Materials/Woods and Woods

"The mean ratio of crown width to sapling height (DrIh) was significantly greater for the suppressed saplings than for the apically dominant group (t = 2.78, df= 18, P < .02) (Table 5), and DrIh was negatively correlated with h for the combined data set (r = -0.76, N = 20, P < .001)."[46]

Notation: let the symbol CWH stand for capillary water height.

"There was a significant difference in CWH for sapwood, between specimens from "wet dominant" group and specimens from both "dry suppressed" and "dry dominant" group during absorption for 7 days and 14-15 days."[47]

"The analysis of the the obtained results concerning the selected wood physical and mechanical properties of both pine species (Tables from 2 to 5) showed that the examined wood properties were higher, generally speaking, in the black pine trees in comparison with the Scots pine, with the exception of the co-dominant group of trees in the first of the two pine tree species."[48]

Hypotheses

edit
Main resource: Hypotheses
  1. As each material is usually best suited for certain uses, each can be a dominant group within these uses.

See also

edit

References

edit
  1. ↑ 1.0 1.1 Mario Affatigato, Steve Feller, Allison K Schue, Sarah Blair, Dale Stentz, Garret B Smith, Dan Liss, Matt J Kelley, Cole Goater and Raghuvir Leelesagar (August 13, 2003). "Studies of oxide glass structure using laser ionization time of flight mass spectrometry". Journal of Physics: Condensed Matter 15 (31): 2323-34. http://iopscience.iop.org/0953-8984/15/31/308. Retrieved 2013-08-29. 
  2. ↑ F.C. Robles Hernandez, J.H. Sokolowski (August 2006). "Thermal analysis and microscopical characterization of Al-Si hypereutectic alloys". Journal of Alloys and Compounds 419 (1-2): 180-90. http://www.sciencedirect.com/science/article/pii/S0925838805015288. Retrieved 2012-02-24. 
  3. ↑ J C Ododo (June 1980). "Magnetic inhomogeneity of the onset of ferromagnetism in randomly disordered alloys". Journal of Physics F: Metal Physics 10 (6): 1261. doi:10.1088/0305-4608/10/6/026. http://iopscience.iop.org/0305-4608/10/6/026. Retrieved 2012-02-24. 
  4. ↑ Vinod Vyasulu and A. V. Arun Kumar (May 31 - June 6, 1997). "Industrialisation in Orissa: Trends and Structure". Economic and Political Weekly 32 (22): M46-53. http://www.jstor.org/stable/10.2307/4405453. Retrieved 2012-02-24. 
  5. ↑ D. Della Sala, C. Giovannella, F. Evangelisti (November 1984). "Study of Bonding Configurations in Amorphous GexSi1−x: H Alloys". physica status solidi b basic solid state physics 126 (1): 125-31. doi:10.1002/pssb.2221260116. http://onlinelibrary.wiley.com/doi/10.1002/pssb.2221260116/abstract. Retrieved 2012-02-24. 
  6. ↑ 6.0 6.1 M. Avella, E. Bonadies, E. Martuscelli, and R. Rimedio (11 April 2001). "European current standardization for plastic packaging recoverable through composting and biodegradation". Polymer Testing 20 (5): 517-21. doi:10.1016/S0142-9418(00)00068-4. http://www.researchgate.net/profile/Maurizio_Avella/publication/222370742_European_current_standardization_for_plastic_packaging_recoverable_through_composting_and_biodegradation/links/00b7d52d3f3b0e8b88000000.pdf. Retrieved 2016-01-29. 
  7. ↑ Dmh (6 September 2004). "material, In: Wiktionary". San Francisco, California: Wikimedia Foundation, Inc. Retrieved 2016-01-29. {{cite web}}: |author= has generic name (help)
  8. ↑ Dvortygirl (22 June 2005). "grain, In: Wiktionary". San Francisco, California: Wikimedia Foundation, Inc. Retrieved 2016-01-29. {{cite web}}: |author= has generic name (help)
  9. ↑ Hyarmendacil (5 August 2013). "materials science, In: Wiktionary". San Francisco, California: Wikimedia Foundation, Inc. Retrieved 2016-01-29. {{cite web}}: |author= has generic name (help)
  10. ↑ Angel Polvorinos del Rio, Stefan Roehrs, Marc Aucouturier, Jacques Castaing, and Anne Bouquillon (June 2010). "Medina al-Zahra Lustre Ceramics: 10th Century Local Nanotechnology or Importation from Middle East". The Arabian Journal for Science and Engineering 35 (1C): 157-68. http://ajse.kfupm.edu.sa/articles/351C_P.14.pdf. Retrieved 2012-02-22. 
  11. ↑ Valentine Roux and Marie-Agnès Courty (2005). Alexandre Livingstone-Smith. ed. Identifying Social Entities at a Macro-Regional Level: Chalcolithic Ceramics of South Levant as a Case Study, In: Pottery Manufacturing Processes: Reconstruction and Interpretation. Archaeopress. pp. 201-14. ISBN 1841716952. http://www.mae.u-paris10.fr/prehistoire/IMG/pdf/RouxCourtyBAR2005.pdf. Retrieved 2012-02-22. 
  12. ↑ Qinghong Xu, Lianshe Fu, Liansheng Li, Hongjie Zhang and Ruren Xu (2000). "Preparation, characterization and photophysicalproperties of layered zirconium bis (monohydrogenphosphate) intercalatedwith rare earth complexes". Journal of Materials Chemistry 10 (11): 2532-6. doi:10.1039/B000991L. http://xlink.rsc.org/?doi=b000991l. Retrieved 2012-02-24. 
  13. ↑ Z.-X. Zhao, Q.-H. Xu, D.-M. Li, G.-F Liu, L.-S. Li, R.-R. Xu (March 2001). "Lanthanide complexes with acetylacetonate and 5, 10, 15, 20-tetra[para-(4-chlorobenzoyloxy)-meta-ethyloxy-phenyl porphyrin"]. Solid State Sciences 3 (3): 339-45. doi:10.1016/S1293-2558(00)01087-6. http://www.sciencedirect.com/science/article/pii/S1293255800010876. Retrieved 2012-02-24. 
  14. ↑ Zhenzhong Yan, Yu Tang, Weisheng Liu, Minyu Tan (March 2008). "Preparation and luminescent properties of silica-based composite materials encapsulating a novel terbium complex". Solid State Sciences 10 (3): 332-6. doi:10.1016/j.solidstatesciences.2007.09.022. http://www.sciencedirect.com/science/article/pii/S1293255807002749. Retrieved 2012-02-24. 
  15. ↑ Jun Xu, Yufei Ma, Lei Jia, Xiaoguang Huang, Zhimin Deng, Haiping Wang, Weisheng Liu, Yu Tang (March 2012). "Assembly, stabilities, and photophysical behaviors of highly efficient luminescent materials fabricated from a terbium complex doped silica/polymer hybrids". Materials Chemistry and Physics 133 (1): 78-86. doi:10.1016/j.matchemphys.2011.12.054. http://www.sciencedirect.com/science/article/pii/S0254058411010820. Retrieved 2012-02-24. 
  16. ↑ N. Cordeiro, M.N. Belgacem, A.J.D. Silvestre, C. Pascoal Neto, A. Gandini (April 1998). "Cork suberin as a new source of chemicals.: 1. Isolation and chemical characterization of its composition". International Journal of Biological Macromolecules 22 (2): 71-80. doi:10.1016/S0141-8130(97)00090-1. http://www.sciencedirect.com/science/article/pii/S0141813097000901. Retrieved 2012-02-24. 
  17. ↑ M R Melloch, J M Woodall, E S Harmon, N Otsuka, F H Pollak, D D Nolte, R M Feenstra, and M A Lutz (August 1995). "Low-temperature grown III-V materials". Annual Review of Materials Science 25: 547-600. doi:10.1146/annurev.ms.25.080195.002555. http://www.annualreviews.org/doi/pdf/10.1146/annurev.ms.25.080195.002555. Retrieved 2011-10-21. 
  18. ↑ P Bennema (February 1969). "The importance of surface diffusion for crystal growth from solution". Journal of Crystal Growth 5 (1): 29-43. doi:10.1016/0022-0248(69)90074-8. http://www.sciencedirect.com/science/article/pii/0022024869900748. Retrieved 2012-02-22. 
  19. ↑ Takeshi Kondo, Kensuke Honda, Donald A. Tryk, Akira Fujishima (August 2003). "AC impedance studies of anodically treated polycrystalline and homoepitaxial boron-doped diamond electrodes". Electrochimica Acta 48 (19): 2739-48. doi:10.1016/S0013-4686(03)00391-8. http://web.uprr.pr/datryk/Journal%20articles/040308kondo.pdf. Retrieved 2012-02-25. 
  20. ↑ 20.0 20.1 William R. LeFew, Stephanos Venakides, and Daniel J. Gauthier (June 2009). "Accurate description of optical precursors and their relation to weak-field coherent optical transients". Physical Review A 79 (6): 063842 (10 pages). doi:10.1103/PhysRevA.79.063842. http://arxiv.org/pdf/0705.4238.pdf. Retrieved 2012-02-23. 
  21. ↑ P L Gareso, M Buda, L Fu, H H Tan and C Jagadish (July 20, 2007). "Influence of SiO2 and TiO2 dielectric layers on the atomic intermixing of InxGa1-xAs/InP quantum well structures". Semiconductor Science and Technology 22 (9): 988. doi:10.1088/0268-1242/22/9/002. http://wwwrsphysse.anu.edu.au/~cxj109/Publications/Paulus-SemiSTech22-07-IFVD%20InGaAs-InP%20QW.pdf. Retrieved 2012-02-23. 
  22. ↑ S. Schäfer, V. Kegel, A. A. Serga, B. Hillebrands, and M. P. Kostylev (2011). "Variable damping and coherence in a high-density magnon gas". Physical Review B 83 (18): 4407 (6 pages). doi:10.1103/PhysRevB.83.184407. http://arxiv.org/pdf/1007.1895. Retrieved 2012-02-23. 
  23. ↑ Haruo Nagai (March 1980). "Thermodynamic analysis of GaxIn1-xAsyP1-y CVD: Ga-In-As-P-H-Cl system". Journal of Crystal Growth 48 (3): 359-62. http://www.sciencedirect.com/science/article/pii/0022024880900299. Retrieved 2012-02-23. 
  24. ↑ C.T. Ho, G. Moeller, J.D. Mathias (March 1983). "Effect of heat treatment on the bulk diffusion length of EFG ribbon silicon". Solid-State Electronics 26 (3): 247-50. doi:10.1016/0038-1101(83)90090-4. http://www.sciencedirect.com/science/article/pii/0038110183900904. Retrieved 2012-02-23. 
  25. ↑ Xiao Feng Sun, Run Cang Sun (July 2001). "Comparative Study Of Methyl-Tert-Butyl Ether Extractives From RYE And Rice Straw". Wood and Fiber Science 33 (3): 386-94. http://swst.metapress.com/index/4602126P85550683.pdf. Retrieved 2012-02-23. 
  26. ↑ Joseph Nelen, Albert Noonan, and Kurt Fredriksson (1972). "Lunar glasses, breccias, and chondrules". Proceedings of the Lunar Science Conference 2: 723-37. http://adsabs.harvard.edu/full/1972LPSC....3..723N. Retrieved 2011-08-07. 
  27. ↑ 27.0 27.1 Jaephil Cho, Steve W. Martin (March 2002). "Infrared spectroscopy of glasses and polycrystals in the series xCs2S + (1 - x)B2S3". Journal of Non-Crystalline Solids 298 (2-3): 176-92. 
  28. ↑ J. J. Zhu & K. M. Liew (2004). "Describing the Morphology of 2 H Martensite Using Group Theory Part I: Theory". Mechanics of Advanced Materials and Structures 11 (3): 197-225. doi:10.1080/15376490490427126. http://www.tandfonline.com/doi/abs/10.1080/15376490490427126. Retrieved 2012-01-07. 
  29. ↑ T.N. Durlu, J.W. Christian (April 1979). "Effect of prior deformation on the martensite burst transformation in single crystals of an Fe-Ni-C alloy". Acta Metallurgica 27 (4): 663-6. doi:10.1016/0001-6160(79)90017-8. http://www.sciencedirect.com/science/article/pii/0001616079900178. Retrieved 2012-02-22. 
  30. ↑ J. R. Comfort, J. F. Decker, E. T. Lynk, M. O. Scully, and A. R. Quinton (October 1966). "Energy loss and straggling of alpha particles in metal foils". Physical Review 150 (1): 249. doi:10.1103/PhysRev.150.249. http://journals.aps.org/pr/abstract/10.1103/PhysRev.150.249. Retrieved 2016-01-29. 
  31. ↑ Takanari Ogata, Kinya Nakamura, Masaki Kurata, Takeshi Yokoo & Michael A. Mignanelli (2000). "Reactions between U-Pu-Zr alloys and Fe at 923 K". Journal of Nuclear Science and Technology 37 (3): 244-52. doi:10.1080/18811248.2000.9714890. http://www.tandfonline.com/doi/abs/10.1080/18811248.2000.9714890. Retrieved 2013-02-27. 
  32. ↑ Jakub Matusik1, Ewa Wisa-Walsh, Adam Gawe, Elbieta Bielaska and Krzysztof Bahranowski (April 2011). "Surface Area and Porosity of Nanotubes obtained from Kaolin Minerals of Different Structural Order". Clays and Clay Minerals 59 (2): 116-35. doi:10.1346/CCMN.2011.0590202. http://ccm.geoscienceworld.org/cgi/content/abstract/59/2/116. Retrieved 2011-10-21. 
  33. ↑ Zhi-Wen Yin, Hao-Su Luo, Ping-Chu Wang & Gui-Sheng Xu (1999). "Growth, characterization and properties of relaxor ferroelectric PMN-PT single crystals". Ferroelectrics 229 (1): 207-16. doi:10.1080/00150199908224341. http://www.tandfonline.com/doi/abs/10.1080/00150199908224341. Retrieved 2012-02-22. 
  34. ↑ G. D. Airey, T. M. Singleton, and A. C. Collop (July/August 2002). "Properties of Polymer Modified Bitumen after Rubber-Bitumen Interaction". Journal of Materials in Civil Engineering 14 (4): 344-54. doi:10.1061/(ASCE)0899-1561(2002)14:4(344). http://link.aip.org/link/?JMCEE7/14/344/1. Retrieved 2012-02-23. 
  35. ↑ Robert Chapman, Bob Leake, Mike Styles (June 1, 2002). "Microchemical Characterization of Alluvial Gold Grains as an Exploration Tool". Gold Bulletin 35 (2): 53-65. doi:10.1007/BF03214838. http://link.springer.com/content/pdf/10.1007%2FBF03214838. Retrieved 2013-02-27. 
  36. ↑ C. M. Woodruff (1941). "The Movement and Evaporation of Soil Water in Relation to pF1". Soil Science Society of America Journal 5 (C): 36-41. doi:10.2136/sssaj1941.036159950005000C0006x. https://www.crops.org/publications/sssaj/abstracts/6/C/SS00600C0120. Retrieved 2012-02-23. 
  37. ↑ Vera Van Lancker & Els Verfaillie (2005). Homogeneous zones, In: Towards a Spatial Structure Plan for the Belgian part of the North Sea. Renard Centre of Marine Geology. pp. 23-30. http://www.vliz.be/imisdocs/publications/76041.pdf. Retrieved 2012-02-23. 
  38. ↑ Henrik Stendal (August 1978). "Heavy minerals in stream sediments, Southwest Norway". Journal of Geochemical Exploration 10 (1): 91-102. doi:10.1016/0375-6742(78)90007-9. http://www.sciencedirect.com/science/article/pii/0375674278900079. Retrieved 2012-02-23. 
  39. ↑ Jian Li, Jie Chen, and R. W. Collins (November 2010). "Broadening of optical transitions in polycrystalline CdS and CdTe thin films". Applied Physics Letters 97 (18): 1909 (3 pages). doi:10.1063/1.3511744. http://link.aip.org/link/?APPLAB/97/181909/1. Retrieved 2012-02-23. 
  40. ↑ Henry Small and Phineas Upham (May 2009). "Citation structure of an emerging research area on the verge of application". Scientometrics 79 (2): 365-75. doi:10.1007/s11192-009-0424-0. http://www.springerlink.com/content/m50710tx1270353m/. Retrieved 2012-02-23. 
  41. ↑ Jeong Yeol Choi, Ping Keung Ko, Chenming Hu, William F. Scott (January 1989). "Hot‐carrier‐induced degradation of metal‐oxide‐semiconductor field‐effect transistors: Oxide charge versus interface traps". Journal of Applied Physics 65 (1): 354-60. doi:10.1063/1.342548. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5084299. Retrieved 2012-02-23. 
  42. ↑ Aneta Šťastná, Richard Přikryl, Jan Jehlička (January-March 2009). "Methodology of analytical study for provenance determination of calcitic, calcite-dolomitic and impure marbles from historical quarries in the Czech Republic". Journal of Cultural Heritage 10 (1): 82-93. http://www.sciencedirect.com/science/article/pii/S129620740800160X. Retrieved 2012-02-24. 
  43. ↑ G. Xue, W. Xu, W.-T. Yu and Q. Fang (January 2002). "N-Ethylpyridinium bis (2-thioxo-1, 3-dithiole-4, 5-dithiolato) nickelate". Acta Crystallographica Section C: Crystal Structure Communications 59 (1): m27-9. doi:10.1107/S0108270102020115. http://scripts.iucr.org/cgi-bin/paper?S0108270102020115. Retrieved 2012-02-23. 
  44. ↑ B. Gebauer, D. Fink, P. Goppelt, M. Wilpert, Th. Wilpert (April 1990). "Multidimensional ERDA measurements and depth profiling of medium-heavy elements". Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 50 (1-4): 159-66. doi:10.1016/0168-583X(90)90350-4. http://www.sciencedirect.com/science/article/pii/0168583X90903504. Retrieved 2012-02-23. 
  45. ↑ M. Schneider, G. Fuchs, K.-H. Müller, K. Nenkov, G. Behr, D. Souptel, and S.-L. Drechsler (December 22, 2009). "Magnetic pair breaking in superconducting HoNi2B2C studied on a single crystal by thermal conductivity in magnetic fields". Physical Review B 80 (22): 224522 (6 pages). doi:10.1103/PhysRevB.80.224522. http://prb.aps.org/abstract/PRB/v80/i22/e224522. Retrieved 2012-02-23. 
  46. ↑ DA King (August 1986). "Tree form, height growth, and susceptibility to wind damage in Acer saccharum". Ecology 67 (4): 980-90. http://www.jstor.org/stable/10.2307/1939821. Retrieved 2012-02-23. 
  47. ↑ Karin Sandberg (2004). Gérard Nepveu. ed. Influences of growth site on different wood properties in Spruce sap-/heartwood using CT-scanner measurements, In: Proceedings of the Fourth Workshop Connection Between Forest Resources and Wood Quality: Modelling Approaches and Simulation Software. Nancy, France: Centre de Recherche de Nancy. pp. 10 pages. http://www.norrskog.se/upload/7262/00-09.pdf. Retrieved 2012-02-23. 
  48. ↑ Witold Pazdrowski (2004). "The proportion and some selected physical and mechanical properties of juvenile maturing and adult wood of black pine and scots pine". Electronic Journal of Polish Agricultural Universities. Series Forestry 7 (1): 6 pages. http://www.ejpau.media.pl/articles/volume7/issue1/forestry/art-03.pdf. Retrieved 2012-02-23. 

Further reading

edit
edit

{{Chemistry resources}}{{Dominant group}}

{{Technology resources}}

Retrieved from "https://en.wikiversity.org/w/index.php?title=Dominant_group/Materials_science&oldid=2239235"