# Fluid Mechanics for Mechanical Engineers/Transport Equations

>back to Chapters of Fluid Mechanics for Mechanical Engineers

## Diffusion Phenomena

editThe fluid motion (convection) takes place with two mechanisms:

- The advective flow, which is the bulk motion of the fluid in a certain direction.
- The molecular motion, which persists to exist even if there is no convection.

The molecular motion is responsible for the diffusion phenomena. In fluid mechanics, we consider mostly the diffusion of mass, momentum and energy.

The diffusion of a quantity takes place always from rich to poor regions. For example, when one puts a drop of ink in water, ink molecules moves (diffuses) from ink rich region to ink poor region. Heat diffuses from high temperature regions to colder regions. Similarly, momentum diffuses from momentum rich regions to momentum poor regions. The diffusive flux in one dimension is formulated by Fick's first law as follows for mass, energy and momentum respectively:

The negative sign is used since the gradient is negative opposite to the direction of diffusion, i.e. with the negative sign the direction of diffusion is correctly assesed. The constants of diffusion are the diffusion constant of one species into another, thermal conductivity and the dynamic viscosity of the fluid, respectively. The diffusion of energy in the form of heat is also called as conduction.

## General Form of Transport Equations

editThe RTT theorem is given only with advection and without any sources. In the more general form of transport equation, the diffusion and the sources of the transported quantities have to be considered. For an extensive quantity , the transport equation is:

where is the source of per unit volume within CV and is the diffusive flux of through the CS of CV.

## Conservation of Mass Equation (Continuity Equation)

editThe integral equation for the conservation of mass law is

According to this equation, when advective and diffusive flux are ignored, it can be seen that the rate of change of mass in the CV is due to the mass sources:

In case of no advective flux and mass sources, the mass in CV, can change only through diffusive flux. Note that, incoming diffusive flux will have a negative sign and together with the extra negative sign its contribution will be positive.

For a differential volume , each term in the integral equation can be formulated as follows:

**The time rate of change of mass in the CV:**

**The advective flow rate of mass through CS:**

The advective flow rate can be decomposed into the surfaces having their surface normal vectors along , and axis:

Hence the total advective flux is:

In fact, one can see clearly the Divergence theorem:
**The diffusive flow rate of mass through CS:**

By using the divergence theorem, the diffusive flow rate can be written for a differential volume as follows:

For isotropic diffusion, the component of the diffusion flux is

Hence the diffusive flow rate can be written as

**The net source of mass in CV:**

The final differential form of the conservation of mass equation reads

and per unit volume

## Conservation of Energy Equation

editThe conservation of energy equation is very interesting since it shows the dissipation of energy and reversible conversion of energy as the fluid flows. The transport equation of energy reads:

where is the sum of internal energy and kinetic energy per unit mass.

Rearranging the above equation for an instant at which CV and the system collapse on each other:

Heat can be added to the CV in the form of radiation or a surface heater. The source of energy can be the energy released or absorbed during chemical reaction or the energy of the added mass from the source of mass. Therefore, can be treated as a part of energy source if it is a volumetric addition and/or as a part of conduction term on the surface of the CV if it is a heating surface.

The rate of change of energy in a differential volume is

The advection term for a differential volume can be formulated by using the divergence theorem

Body and surface forces work on CV

where is the sum of the stress caused by pressure and viscous stresses

Hence, Since is the local stress vector and is the stress tensor.

For a differential volume, is the stress vector on a face having its normal in -direction.

In order to have a better decomposition later, one can switch and index since and use the equality

The heat diffusion (conduction) term for a differential volume can be written by using the divergence term as:

Rewriting the energy equation, using the above forms derived for a differential volume:

or per unit volume

When left side of the equation is expanded,

it can be seen that the first term involves one part of the conservation of mass equation. Neglecting the diffusion and source of mass, the continuity equation can be set to zero and the energy equation can be reduced to:

The left side becomes the substantial derivative of the energy per unit time:

### Decomposition of Energy Equation

editInserting the definition of and expanding the work done by pressure and viscous stresses, Since ,

Now we can decompose this equation into the mechanical and thermal energy equations. The underlined terms are nothing but the scalar product of the velocity vector and the momentum equation and form the mechanical energy equation, the remaining terms form the thermal energy equation.

The mechanical energy equation: Since and The mechanical energy equation can be written in a more interpretable manner:

The thermal energy equation: The meaning of each term is as follows:

Term | Physical meaning |
---|---|

Rate of work done by pressure. | |

Rate of reversible conversion of kinetic energy into internal energy. (-) in the case of compression and (+) in the case of expansion, because for compression and larger than 0 for expansion. It appears with a negative sign in the internal energy equation. | |

Rate of work done by viscous stresses. | |

Rate of dissipation of mechanical energy, in other words irreversible conversion of kinetic energy to internal energy. It is always negative. In other words, mechanical energy drops due to this term. In the internal energy equation it appears with a possitive sign. | |

Rate of reversible conversion of kinetic energy into internal energy. (+) in the case of compresion and (-) in the case of expansion, because for compression and larger than 0 for expansion. | |

Rate of increase of internal energy by irreversible viscous dissipation. It is always positive. In other words, internal energy increases due to this term. | |

Rate of heat added or extracted via conduction (thermal diffusion). It can be (+) or (-). | |

Rate of head added via combustion or radiation. |

### Comment on the dissipation term

editThe dissipation term is always positive and extracts energy from the mechanical energy equation and increases the internal energy. This can be shown for an incompressible Newtonian fluid as follows:

The velocity gradient term can be expanded as:

Hence the energy dissipation rate per unit mass reads:

As can be seen, all the terms are positive. It should be noted that there would be no dissipation without the viscous stresses or velocity gradients. In fact, viscous stresses do occur only when there is a velocity gradient. Hence, in order to avoid dissipation one should avoid or reduce unnecessary velocity gradients.